Retrotec DM32 User Manual download pdf (Page 48)

Page 48 of 94

©Retrotec Inc. 2014

Figure 56: Connect multiple gauges to a wired network using a powered Ethernet Switch

Each gauge can be located up to 328 feet (100 m) from the switch/router used to group the gauges, and

that switch/router can be similarly up to 328 feet (100 m) from the computer, so the switch/router also

provides a way to extend the distance between the gauge and your computer.

There are a number of ways to connect gauges to a computer or other device using networking, as shown

in Figure 57 and Figure 58. If more than one gauge is to be connected to a computer, the customer must

supply the switch/router networking devices shown in the diagram. The Router Creates a network. The

other devices then Join the network that has been created by the Router.

Figure 57: Multiple gauge connection and networking possibilities with the DM32

To connect the gauges to a computer via “Wired” network:

1. Connect one end of a Cat5e or Cat6 Ethernet cable to the “Network” port on the gauge

2. Repeat for each gauge

3. Connect the other end of each of the Ethernet cables to its own port on the switch/router

4. Connect a Cat5e or Cat6 Ethernet cable from the switch/router to the Ethernet port on the

computer

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 93 94

No comments

Retrotec DM32 User Manual Page 48